Quote:
|
Originally Posted by GregA
I drove it a couple of times today and my wife drove it once. Still working!
One suggestion - check for codes (turn key from OFF to RUN 3 times within 5 seconds. Stop at RUN the third time - watch the check engine light for flashing patterns).
My Check Engine light did NOT come on any time during the initial problem. I only got the code 11 after it failed to start while cranking. That (& Dale's comment) led me to the CPS.
Take Care,
|
I'm dealing with this misfire problem on a 4.0L 98 . So far have replaced, battery,plugs, wires, the coil, Map Sensor, Cam Shaft Sensor, today the Crank Sensor. Still misfiring just before engine heats up to full temp, then runs fine. Next will be the TPS I suppose. No computer codes show, scanner tests al fine. Just passed emmisions test fine too. Three mechanics have looked and still no luck. Anyone want a Jeep CHEAP ?