Hey guys, thought I'd kick off a ProMod-Doorslammer project I've been kicking around for quite some time now.....
Seeing as we now look like we may have a contest on our hands, it's great insentive for me to do some work....
I have a 68 Camaro body from Chris @ TopEndMiniatures, waiting in the wings,......but I've decided to have a go at my own body style....
Been dyeing to cut into this 70 Camaro for ages....
So, knife, saw....all at an easy reach.....LETS CHOP.......
So far, the body has been stretched, to gain the maximum length advantage of 114-115", I think, if thats correct....The front end has the standard Z28 style spoiler added, but right at the very front, not under.
The sides of the body have been straightened and the wheel openings have been reshaped....
Still need to add some to the hood, probably just at the rear of it.
The rear deck has been added, and the rear body width pumped out by about 2.5mm on both sides....
Here's a couple of pics to give you an idea....
This chassis probably wont get used, as its only single rail (its from a Pro Stock)..I'll most likely make a new one from brass rod, in the newer style double rail design....
And I'm still deciding on a powerplant......I have this Pro Stock motor sitting around, all it needs is some NOS fitted to it, and it would suit nicely,......but I really want blown power......
......I'm waiting on some parts a Mate is sending out for me.....If they make it in time...It'll definately be blown....
70 ProMod Camaro
Lets know what you think so far....Still a ways to go....
cheers stump
