Quote:
|
Originally Posted by jzimms
kev62:
I cleaned my IACV and put it back on the pu and it runs much better. The valve was all carboned up so I used some carb cleaner and doused the thing bout 3 or 4 times. Runs much better now.
|
Hey, Kev. Sorry for the long delay in responding. I have been out of town and did not get to a computer. It is on the drivers side of the Throttle body. You will need to take off the air cleaner and such. It is like a 32 or 34 mm and it looks as if it will not come out but it does come. There is an electrical terminal hooked directly into it of which you will need to disconnect, sorry I put that in there just for the obvious.
I soaked mine in carb cleaner and sprayed it up really good. It worked for about 1 or 2 days in cutting down the fast idle but it is back to its old ways. I am going to replace the TPS here shortly and let you know what happens.
Sorry again for the delayed response. I am back now and able to help out. I purchased a chiltons manual and it really has helped out. If you need any further help do not hesitate to holler.
Joe Z