Quote:
|
Originally Posted by ypelchat
...Next:
If you look carefully, you will find that there is an unused connector, near the windshield washer tank. This connector will be used for the outside temperature sensor. However, in my 2001 Venture, there's an extra wiring harness extension that needs to be purchased (about two feet long). You will need this wiring extension to be able to install the outside temperature sensor to the right place. So you will have to purchase the sensor itself (about $10.00) and the wiring extension harness (about $12.00). Maybe this extra wiring harness is already there on the Pontiac Montana, but in my 2001 Venture, it's not there, so I had to purchase it....
Yves. |
I got an overhead console with the options I need (OnStar, Switch for rear windows) from eBay, plus it came with the "HomeLink" and the Driver Information Center too. Took a couple hours to get swapped because of my large hands and small space to work between the roof and headliner.
Now for the question:
Does anyone have the part number (GM or AC/Delco) of that "Wiring Extension Harness"?
I found the connector near the windshield washer tank, but of course there is no extension cable.
Oh yeah, I put a thermister from Radio Shack in the connector near the washer tank and I get a reading on the display (instead of OC). I don't think the reading is accurate (seems a bit high), but at least I know I have the right connector. I will get the GM Temperature Sensor from a dealer on Monday and would like to get the right cable to connect it.
I also noticed that the connector near the washer tank is a 3-pin connector (with only 2 pins used) and the diagram for the Temp Sensor connector shows only 2 pins! Is this right?
Thanks is advance,