Quote:
|
Originally Posted by lewisnc100
Debbie, the fix isn't that difficult, but it will be tedious. You'll need to use an air compressor and one by one disconnect the EVAP lines and blow the charcoal out. You'll also need to check all the EVAP components along the way and probably clean charcoal out of them. At the very least you'll need to buy a new charcoal canister and possibly a new vent control valve if the old one does not come off the canister. You should probably just change it since it is cheap and a component that fails. I've posted the part#s for the 97 canister and valve before, let me know if you can't find them. Hopefully the other EVAP components are fine once cleaned up. Best case you're out ~ $100 in EVAP parts and time to blow out the lines and components.
Here is the service procedure with the steps and diagrams, good luck.
http://www.infinitihelp.com/Ownershi.../NTB00-085.htm |
Thank You so much for all this info. I have a list of parts nissan said that it needed: Canister 141.67, purge valve 99.00, control valve 182.87, filters 38.98, cut valve 79.54, lines 13.00, there was a few more but I don't remember all there names. It was around 600.00 just for the parts they told me. If I can get them cheaper Please let me know.
Thank You so much, Debbie