Here are the gear ratios for the P10 G20 and the NX2000
P10 G20
1st 3.063
2nd 1.826
3rd 1.207
4th 0.926
5th 0.733
Final Drive ratio 4.058:1
Reverse 3.153:1
Nx2000
1st 3.333
2nd 1.826
3rd 1.286
4th 0.975
5th 0.756
Final drive ratio 4.176:1
Reverse 3.153:1
I am wondering if when I install an NX2000 tranny into a P10 if these ratios (NX2000) will make any performance improvements.
Could be a stupid question but I'm only good at installing parts the numbers screw me up sometimes
