[CoachKarl]

Hello everyone,

Intstalled the trans cooler. I was just about to cut throught the plastic on top of the radiator, as you suggested Wiswind, but then noticed the PSteering cooling tube coming around to the front of the radiator on the passenger side. I then noticed that the same gap existed on the drivers side, and this is the way the tubes to my cooler are routed. I cut my old top radiator hose through the band saw to create an anti chafing sleeve, and ran two hoses through it. I tied into the line the top rad fluid line. Biggest problem was pulling the fans back enough to shove the mounting clips through the radiator. The cooler is mounted vertically, with the entrance exit tubes facing down. It is directly in front of the drivers side radiator fan.

Thank you for all your help. Wiswind, the pictures are great. I must investigate posting a few. It sure helps to see the dark innards before you have to go there yourself.

Karl