[wiswind]

Tranny cooler lines, take a look down behind the driver side headlight.....next to the ABS module....you should have a clear shot......And then I was able to squeeze through to in front of the radiator. I removed the plastic trim panel that is above the top front of the radiator.....to work with the cooler / fluid lines. I had 1 sharp edged sheet metal point...that I cut a piece of plastic door edge molding....and slid it over....to prevent the hoses from being cut. Elsewhere....I slid some plastic covering over the hoses...in my pictures...it is light blue. My cooler is installed with the connectors facing UP....so the lines go down to it from above. I had to trim a corner off the plastic trim piece to get it to go back on. The whole system has been working great for over a year.