[Forkliftguy]

Damn....I was getting a rapping noise when I would get on the throttle from an idle, looked like it was the tensioner because every time the noise happened the tensioner would hop like crazy and that seemed to be the area where the noise was being created (plus when I changed my belt a couple of months ago the tensioner pulley bearing was pretty worn and so was the spring). I just changed the tensioner with a new one only to discover the noise is still there, not as bad mind you (I obviously needed a new tensioner anyway so I'm not out any money). I fear this may be created by one of the valves on #1 now. Any thoughts or suggestions? '01 GA SE DOHC by the way.

Thanks
Marc