[wiswind]

Fans seem to be working now.
I installed a new CCRM (Constant Control Relay Module). I also removed and re-installed the connectors on the 2 thermal sensors (found that I had gotten the wrong sensor). All connections were tight and looked clean inside. So could have been a connection, or could have been the CCRM.

Most people would not notice that the fans did not work...except with the A/C working...as the A/C runs in all settings except "Vent" and "OFF". So the fans cycle much more....and would not activate by the temperature. I test this function each spring....and it failed this time. They pass now.