Answer to Reving Problems!
I had posted on here about my problem with my 92 hatch with a d15b reving by itself between like 1000 and 2000 up and down, up and down, but today I fixed it! the problem is this little spring thingy at the back of the throttle body. it's a little flat plate with two screws located under the tps(throttle position sensor), and you just take the plate off and screw the little plastic peice in with two fingers. screw it all the way in, till it stops. then you replace the plate and screws. But it's hard to get to, so you may have to take the throttle body off like I did, but you will need a new throttle body gasket if you do this. I hope this helps some of you out there with this problem.
|