[GASE 95]

it is held in by clips but you have to remove all the screws first which should be pointed out by the website knifeblade posted. I looked at the website and its definitly not exact pictures of your car but you could figure it out because its the same idea...but i'll try to explain this anyways. Theres screws around the lower outer edges of the door, one underneath the armrest (this one is big and kinda hard to find), and another one behind the lock that becomes visible when you lock the door. If you have manual window cranks it gets tricky. Theres a clip on the inside of the crank down inside the door panel. You can get that off by dragging a rag across the base of it and that will snag the clip off. The crank will pull off. Once those are are done you still have to pull kinda hard around the edges of the panel to get it off. Dont forget that at the top of the door where the seatbelt goes into the door panel theres a clip that comes out so u can free the door panel from the belt.