Quote:
|
Originally Posted by mn80228
As far as a gauge, it is a measure of the thickness in some way or other.
Not sure exactly where it comes from.
-matt
|
OK Matt - you scratch my gauge, i'll scratch yours.....
"American Wire Gauge (AWG) is a U.S. standard set of non-ferrous wire conductor sizes. The "gauge" means the diameter. Non-ferrous includes copper and also aluminum and other materials, but is most frequently applied to copper household electrical wiring and telephone wiring. Typical household wiring is AWG number 12 or 14. Telephone wire is usually 22, 24, or 26. The higher the gauge number, the smaller the diameter and the thinner the wire. Since thicker wire carries more current because it has less electrical resistance over a given length, thicker wire is better for longer distances. For this reason, where extended distance is critical, a company installing a network might prefer telephone wire with the lower-gauge, thicker wire of AWG 24 to AWG 26.
AWG is sometimes known as Brown and Sharpe (B&S) Wire Gauge. "
also webster's:
" Wire gauge or gage.
(a) A gauge for measuring the diameter of wire, thickness
of sheet metal, etc., often consisting of a metal
plate with a series of notches of various widths in
its edge.
(b) A standard series of sizes arbitrarily indicated, as
by numbers, to which the diameter of wire or the
thickness of sheet metal in usually made, and which is
used in describing the size or thickness. There are
many different standards for wire gauges, as in
different countries, or for different kinds of metal,
the Birmingham wire gauges and the American wire gauge
being often used and designated by the abbreviations
B. W. G. and A. W. G. respectively."
Thanks for giving me the decimal numbers - I am embarassed to be so lazy Sooooooooo publicly
best regards
stevenski