05-05-2005, 08:31 AM
|
 |
I got your v-8 swingin!!!
|
|
Join Date: Aug 2003
Posts: 2,965
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
|
Re: Killswitch
Quote:
|
Originally Posted by Robs71Nova
The easiest way to install a kill switch is to find the power wire to the ignition coil, and install the switch inline with this wire. When the switch is off, no spark, and the car will not start. However, for this type of switch I recommend putting this switch inside the car somewhere, in a hid place. Somewhere under the dash, or whee only you know whee it is. Be careful not to accidentally swotch the switch off while the car is running though, because it will shut the car off. If you have a MSD box, your going to want to slice into the green wire running from the MSD box to the ignition coil.
Rob
|
yes that is the wire I was talking about. I was trying to figure out the color of it.
__________________
Grand National. Going fast with class.
Voted FASTEST street car on AF.
Here is the proof!!!
1987 Buick Grand National.
Back in action!!!!
1999 Ford F-250
Tow rig from hell 598 Ft-lbs.
ASE Certified in...
Mobile AC
On Highway medium duty diesel engines.
Off highwayy medium duty diesel engines.
On highway trucks.
Working on the eletronics certification
Member ofA.A.N.B.C- Afer against non boosted crews #2
|