[Lumina98]

Thank you for your help!
After changing Throttle position sensor the transmission became good, but after I cleared codes, computer started showing code P0336 - Crankshaft Position Sensor. So that is why I am going to change also Crankshaft Position Sensor. I have to remove Check engine Light. I need to pass inspection soon.
Thank you again for you help. Just bought Lumina 1998 3.1 recently, and would like to fix it and drive it. I love this car.
Thanks.

P.S. Jeffcoslacker asked: "By chance was it idling high too?". When I bougt this car, that day everithing was fine. But I didn't drive it much that day. Next day I went around city, and found that the engine stopped sometimes when I was taking foot off from the accelerator. Sometimes the idle was to high also. So it didn't work right. Even the engine was too noisy. On the next day I found, that it started shifting wrong. As I told it shifted at the next gear on too high rpm. I connected the computer and it gave me codes P0122 and P0336. I tryed to clear them, but P0122 TPSensor stayed. So I decided to buy TPSensor. I replaced TPS and everithing became fine. But after couple hours Check engine Light came again, so I connected computer again - P0336 - Crankshaft Position Sensor. That is my story. And that is why I think I have to replace Crankshaft Position Sensor. (Besides Airbag Light)