well i found a possiable problem...all the bolts on the valve cover by the spark plugs were like hand loose!!! along with all the outer ones. so i tightened them all up and also my exhaust manifold nut closest to the pass side was also very very loose!! and while cold and revving the engine you could hear the exhaust gases leaking out, thats how bad it was. so i tightened that up alot and no more leak there, now when i took the plug cover off i see a pool of oil and see that the oil cap's o-ring was completly rock hard and leaking everywhere! so i went to mitsubishi parts store and got a new one, along with a new filter and some mobile 1 just for the heck of it. Also relized that on my BOV line that there was still one oem hose clamp with no clamping power still on so im changing that over to a ziptie like the rest
that should help with the overall performance of the engine at least i also redid all the little vaccum lines with zipties to ensure that they were as tight as i could get them -Ryan