|
Re: oxygen sensor code PO135 & misfire in #5
Napa had only had bouch and I had to go to 2 stores to get 6. I changed the preconverter o2 sensors and that only took an hour including one trip inside for a band aid. (no job is complete without shedding some blood).
The big problem is I still have a misfire in #5. This is a 97 V6 so it has the coil packs on each plug. Can those be tested with a ohm meter? Any other suggestions BTW the Bousch are platinum OEM recommended but were only about 2.95 ea. I was expecting 6.00 or so.
__________________
Life is good with my 97 Passport
|