[Toke138]

JC witney performance control arms are bad?

Its the kit they sell with the aluminum control arms.

And they are only in the rear, stock arms in the front, I should have mentioned that.

I have had a camber problem ever since I got the 17" rims, it got real bad with the drop, way past stock adjustments, the upper control arms just barely gave me enough adjustment to be within acceptable range.

After driving on it more I have noticed that it only gets squirrely when Im breaking at high speed. My breaks are fine, it did not do that before the new parts.

My toe is perfect, I know that much. Camber is good too, I am not sure about the caster though. My toe WAS real bad before the alignment, it was visibly off and was causing tires to squeel during turns. (I replaced inner tie rods aswell) The toe is now dead on.

What problems should one expect from bad caster?

The car handles GREAT overall, I can take those highway clovers at about 70mph without a peep from the tires. But I still have those 3 problems.

Any advice on fixing them?