View Single Post
  #6  
Old 04-21-2005, 09:24 AM
lkurek lkurek is offline
AF Regular
 
Join Date: Nov 2004
Posts: 86
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Re: Re: DIC and Steering Wheel Controls

Quote:
Originally Posted by cptpalmer
I have narrowed the clockspring down to part #26090357, is that correct ikurek? I also found a steering wheel for $50. Does GM make the wiring harness, or is running your own wires necessary? I still need to find a dealer for the tech 2 flash. Someone told me that the cluster is the same but the window does not seem large enough for a DIC, it appears only half the size.

Not sure on the part number....but there are only two available. The one with the steering wheel controls, and the one without. Any GM dealer should know which one you need...

Yes, GM makes a harness, but to get the wiring you need, you will need to buy a complete dash and interior harness. MAJOR $$$$. For some reason, GM actually only builds the harnesses with the wiring for the options the truck has. They used to build them with the same (full) harness, but I guess this saves money for them. It isn't that hard to run your own wores, just takes time and the right connectors. If you ever did it before, this is NOT a job you should just jump into. It is not plug and play.

Whoever told you the cluster is the same is full of crap. They are different. Beleive me, I have both and not only do they have different displays, they also have different internals to drive it.

Good luck!
Reply With Quote