Thread: gettin low....
View Single Post
Old 04-16-2005, 08:15 AM   #2
CBURKE
AF Enthusiast
 
CBURKE's Avatar
 
Join Date: Dec 2004
Location: ZEPHYERHILLS, Florida
Posts: 1,167
Thanks: 0
Thanked 0 Times in 0 Posts
Re: gettin low....

I would say eather get coilovers and go as low as you want, or get a good 2' drop spring like Skunk2. One thing you have to think about is that most springs will sag and give you a lower drop then they say, but 2' should be fine. Get some good struts before you even get your springs. This way you will not be to tempted to put them on your stock struts. And take it from me you don't wanna have to do the job twice. If you put them on stock struts you will blow them out and then have to take the springs off again to put them on new struts. The struts you should get are aftermarket, KYB, Koni. You can find them on any import web site. Good luck, and don't forget do things right the first time.
__________________
98 MITSU GST, 1990 TURBO MOTOR
98 ACURA INTEGRA LS
88 HONDA CIVIC HB
97 HONDA CBR 600
91 HONDA CRX DX
89 JEEP
CBURKE is offline   Reply With Quote