|
I have a 2001 with both front doors doing the same thing.I took the passanger side off and they are a little tricky to get to. As far as the door panel it was easy 2 screws on the arm rest 4 screws holding the door panel on. plus the pop out covers for the top by the mirror and the door handel inside.I am going to try a universal actuator that i found on line it will be a couple of weeks before I try it because I need to find out more on the wireing of it. So far i should be able to leave everything in place and some how splice the wires to the new actuator and run the rod to the door lock rod all ready there.I did notice 2 plugs going to the old actuator so the problem will be finding the power to steal from it to make the new actuator unlock and lock It will take a little testing.Just hope i dont blow a relay or somthing.If this all works out.I will do my best to explain and post it back. Also if it works the total cost will be 27.00 for both actuators. Yes 27.00 thats why i need to research further before trying this. So far I do think it will work. I will post back when I get started and done with. Later,Gary
|