i did check the fuel lines and they are all clear. i don't have an aftermarket ignition but was planning on running a msd 6 ignition. checked the plugs and they are all liike a lbrown color. now when i pulled the plug nearist the distributor it did have a lil oil on it. and i checked my computer it is also givein me a code 10 which in alldata says it is my air intake temp. so i went and checked it and it was snipped and the wires ran to the underside of the intake so i reran them to the sensor and reset the ecu and then it went out for like 3 mins and was back with the same code. So what is my next move?