Quote:
|
Originally Posted by OldsAuroraMan1
1. Are these sensors easily accesible?
2. DO NOT PUT ANYTHING but GM sensors on! If you can get the GM sensors at Advance, go for it. Typically the "Other brands" do not have the quality in their electronics that the GM electronics have.
I had replaced the Fuel Pressure Regulator and it still stalled as well. So, the weak signal sounds reasonable - as well. The FPR surely can and does cause a stalling situation with some Aurora engines as some posting here and on other sites have noted.
Was there any other problem associated with your malfunctioning sensors besides the stall at a stop Stealth?
|
I only use GM PARTS. The sensors were GM PARTS ONLY. No problems since.
Funny, today the wheels are in the shop getting the Drivebelt replaced. Just went 1 year and a few days after I had the last one replaced.The other issue when stalling was the SURGING that would come with it. The rpm would kick up on the dashboard then the loud sound would come down. So I would say the surging was the other problem. I also had the fuel pressure regulator issue. I took it to a dealership years ago,(before I knew about this forum) and they only checked out the charging system and could not find the problem. There was no stalling with this issue though. Just leaking fuel around the engine and a long crank when starting the engine before I had the fuel rail replaced. Hope this helps.
