View Single Post
  #4  
Old 03-10-2005, 10:20 AM
maxtone_witherball maxtone_witherball is offline
AF Newbie
 
Join Date: Jun 2004
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 95 Cut Sup Not turning over

I had this problem too. In my case it was the key, and I suspect the same in your case. Try your other key. The security chip embedded in the key is a little resistor. As the key gets used, the contacts wear down until eventually they are unable to complete the circuit.
Reply With Quote