[stranger2reason]

hey
i have a tranny that was shifting out of gear then wouldn't go above 2nd (computer does this to protect the tranny) - turned out there's a screen between the two solenoids that just floats around after it ages because it's held in place with an rubber o-ring.

Replacement kit is available with aluminum L-bracket to hold a new screen in place. Comes with solenoids because the screen bangs on the solenoids.
Total cost $330

Then it started slamming into reverse : my transmission guy found a metal shaving stuck up in the valve from manufacturing...stuck the valve open and the pressure was too high.
Cost: $120

Check the line pressure.
Find a good tranny guy.

s