|
Re: Cant get BOV off!
I drilled the hole through the firewall where there wasn't anything on the engine bay side.... just use something like the steering column as a reference from both sides of the firewall. I drilled a hole just big enough for the vac/boost tube to fit nicely... drilled from inside the car...kinda sucks ..there is the mat on the firewall inside.... I cut a opening... otherwise the fibers wind up on the drillbit.. you only need to feed the tube through... the wires splice into ground and power from inside the car...
As for the A-pillar.... GET ONE!!! at the base of the pillar there is a gap on the side of the dash and pillar... thats where you run the tube and wires.... the gap is about an 1/8 inch....
I agree with 99eclipsegst on taking the wheel off for the UICP or at least turn your wheel to the left all the way to make some room....just take the wheel off....
__________________
"A man's greatest work is to break his enemies, to drive them before him, to take from them all the things that have been theirs." -Ghengis Khan
|