|
Re: Cant get BOV off!
The way I did it is the same way electricians run wire....use your imagination... something ridgid pushed carefully from the bottom of the A pillar down below. Best to have a friend push it down while you are underneath to guide it...then you can tape wires to end and pull them through... same for vac/boost tube going up to guage... remember to plan out what you are going to do, then do it.... plan plan plan= success
Oh yeah.... as for the vac/boost tube... I drilled hole through the firewall VERY CAREFULLY.. worked like a charm and I didn't have to worry about the hose being smushed by wiring harnesses and such...
__________________
"A man's greatest work is to break his enemies, to drive them before him, to take from them all the things that have been theirs." -Ghengis Khan
|