|
Re: Headlight Replacement
Well there is a bit more to it than taking off the back cover, and replacing the bulb.
First you have to get to the back cover, as when the headlamp assembly is in the car, it is right up against oter assemblies, and so, the head lamp assembly must be pulled out of the car in order to get to the back cover.
For the passenger side, you must remove four number 30 torx screws, two on the top of the headlamp assembly, easy to get to; and one on the back of the assembly, and one on the inside radiatror side of the assembly.
Tese are relative wasy to losen, as they do not have to be completly removed in order to pull out head lamp assembly.
Once the two on the top are removed, and the other two well lossened, the assembly slides out of it's "hole" and allows for access to the back.
Replacement is the reverse.
The right side of the car, is a bit tricker. mostly the same as above, except you have to remove the prewarmer for the theair intake to egt to the second set of screws.
Once removed, access to the back screws is easy, and if you follow the above, it all works out.
|