|
Re: 240sx FAQ "Suggestion Box"
it can go on either, s14 or s13 from what i understand
if you go intercooled i bet you could get about 7psi, but why would you want to risk it (Stay with 5 until you upgrade injectors, etc)
you will already have an fmu if you buy the stage 1 kit (it comes with it) i would say you could get away with an fmu for about 6 psi
i really dought it would bolt right up, that would be a coincidence if it did, but you would be better off buying the kit, you're going to need the stuff in that kit anyways..
__________________
mods list: t3/t04e, iap oil lines, iap i-c piping, xspower i-c, z32 mafs, enthalpy tuned ecu, 615cc injectors, s14 tomei fuel pump, blitz DD bov, tial 38mm w/g, BD exhuast mani./downpipe, Spec StageIII clutch .
.s13 power.
power estimate at ~ 270 whp @ 11 psi.
|