|
hey...
If you never changed them... it is quite easy, however, due to several different styles it might be difficult to explain.... The best way is to buy the Haynes manual it probably isn't even $15, probably less and go that way... Mine had 2 bolts for the caliper bracket and 2 bolts that hold the other piece, (can't remember what it is called), sometimes it is 2 tight and you might have to take the hose and bleed your system when done... If you have over 50, 000 kilometres on your truck and never changed them before... then be prepared to bring out the good ol' propane torch... I sure had to do a lot of "torch'in go'in on"..... anyways, buy the book and good luck....
|