[ChoochCharlie]

Hey Phix.
Took me and a friend the better part of a Saturday.
In the past I have done complete engine rebuilds but that was years ago. The experience I needed was knowing that the parts need to be PERFECTLY cleaned of old gasket prior to re-assembly. (mistake made on a Jeep head gasket years ago)
Figure on it taking all day and maybe two. Dont rush the job.
And a trick. The injector array is difficult to come off. Try to pop each injector separately then lift the entire unit. To re-install, allign all injectors and gently tap with a mallet on each injector. They pop back in. Go slow and stop if in doubt.