Quote:
|
Originally Posted by movin2stereo
Never,never,never run through a door jamb!  A accident waiting to happen!I ran mine through where the rest of the wire harness goes through(driver side),just poked a hole through the rubber grommet and got a metal clothes hanger and pulled it through.It's a tight fit though.Don't forget to seal it up.Also make sure you put a inline fuse just off of the battery.I have seen cars go up in smoke when they didn't use a inline fuse and they ran the wire through the jamb. |
Well at least we all agree on not wiring it through the door jamb lol well except for some of us. i mounted my amp on the back wall. its got a bunch of blue leds inside of it, its a bit of a show amp so i wanted to show it off. Theres not much room under the seat, and you dont want it to over heat cause there just went your amp. most manfacturers will tell you to give it a couple inches of space infront of the fan, if it has a fan, other wise just mount it somewhere it can breathe. some of them also have vents, so your suppose to mount it vertically or horizontally. just check the owners manual.