[Uberschall]

Hello,

I have and 85 Fiero 4 cylinder iron duke. The head was cracked when I bought it (didn't know, won't make that mistake twice) so I replaced it with the correct head (magnafluxed and checked etc), new head bolts, push rods, and of coarse new gaskets and torqued everything to spec in the correct order yadda yadda. The SOB started leaking at the thermostat housing and after a few trips to parts store one old man told me it was supposed to be sealed with silicone (Tell me if thats right?) so I used it and it worked! The valve cover leaks, and thats new to, so I am trying some Lucas stop leak stuff and the head gasket is leaking coolant and I tried some stop leak that is supposed to be a permant seal, and that so far has worked well. I finally got to take it for a nice drive on the freeway and BAM! the SOB is leaking at the thermostat housing again. At any rate I am pretty fed up with this engine.

I got a free 89 Camaro with a 2.8L (the body is shot but the engine is good). The question is, is this a fairly easy swapable engine and what all do I need off the camro if so. I have the whole thing.

Thanks.