i had the same problem with my 97, right around the area of the ignition theres a little rubber piece? mine has been removed but if you take it off, leaving the plastics on and look inside you will see a white plastic switch thing with a little round metal piece maybe 1/4-1/2 inch long. the metal piece is down while the key is in and up when you turn the key back, if you reach in when your key is stuck and lift up the little metal piece up (it slides up into the white plastic piece" while its up turn the key back and it should come out. i would try a little bit of lubrication on the metal piece. oil, any type of grease might get too thick and not let the metal piece move freely. let me know how you make out and if it is any help