[FoRCedInDuKsionGsT]

Originally Posted by 95 GSXracer

The lowest you can set will be what your wastegate actuator spring is. Your 16g's actuator is roughly 10-11 psi, so thats the lowest you can go.

I would remove the Joe P from the loop, running a straight line from the source you use right to the WG actuator nipple. If its 10-11 psi, its a problem with the MBC not going low enough. If its still 16 psi, you have boost creep, and will need to do some porting or other mods to reduce it.

Thanks!
I was wondering, when you say remove it from the loop and straight line from the souce? i don't actually understand. Sorry...im still a newb.