View Single Post
  #2  
Old 01-12-2005, 05:04 PM
kingarthur2 kingarthur2 is offline
AF Newbie
 
Join Date: Oct 2004
Posts: 52
Thanks: 0
Thanked 1 Time in 1 Post
Re: A/C bypass on 94 3.8 trans sport

Quote:
Originally Posted by onepercent
Hello - I am new to this forum and have a question for you all.

I just recently acquired a '94 Trans Sport 3.8

The van sat for over a year in the harsh Michigan weather-
the A/C is froze - thus not allowing the serpentine belt to move-

I don't care about havin A/C - so I would rather not spend the $300 bucks on a new one-

Is there a way to bypass the A/C ?

any help would be greatly appreciated
Hi onepercent:

Your A/C compressor pulley wheel and clutch plate should spin freely when the A/C is switched off. Remove the serpentine belt and try to turn the pulley wheel by hand , if the wheel will not turn then the clutch hub bearing is siezed. A new bearing is required and will cost approx $30.00 + fitting. All this can be done without touching the A/C compressor internals. Once the bearing is replaced you can use the vehicle even if the A/C system is empty and the compressor will not engage.
Reply With Quote