View Single Post
Old 01-12-2005, 10:11 AM   #11
BboyOxygen
AF Newbie
 
Join Date: Dec 2002
Location: San Ysidro, California
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to BboyOxygen Send a message via Yahoo to BboyOxygen
Re: Re: Need help with my 1995 gsr please help

Quote:
Originally Posted by superbluecivicsi
Since you havnt mentioned what SC you have yet, lemme give you the basics.

First, if you are still on the stock piping, then, replacing that will give you many improvements. colder plugs gapped between .032 - .038 will help. A boost gauge at least will do, so, you can tell us where your boosting at (also so you will know yourself).

Hey Bbotoxygen,

What SC are you on? Hows the duty cycle on the 440s holding up on 14.5 psi?
Running a Jackson Racing. The 440s are holding up great! I have a pretty good tune with hondata. The only thing that I'm going to get is valvesprings, retainers and an MSD SCI.

I'm making power all the way to redline so if I move up my redline a little I should make some more power.
__________________
1993 Honda Civic EX (B18C1 Swap Supercharged at 14.5PSI)
Bored .20 over, 9.8:1 Arias Pistons, Eagle Rods
RC 440 Injectors, Walbro 255LPH Fuel Pump, Fidenza Cam Gears
NGK Wires, NGK Plugs, Intake, Integra Type-R Header
High Flow Cat, 3" Kteller Exhaust with Magnaflow Muffler
B&M Fuel Pressure Regulator, HONDATA S200 w/Boost Tuned

Wanna race?

AF MEET IN LOS ANGELES!
BboyOxygen is offline   Reply With Quote