There's gonna be a start to finish tutorial on hand lettering on it at least. But in the meantime, how about a quick fencing lesson for starters?
A little quick, cheap tip for the fence. Get a few 1/8" rods from your local hardware ( about $1.50 for a four foot section at HD) and cut it in about 5" sections so you'll have enough to sink in the holes where you mount them. I used a full length section for the top rail soldered to the posts.
Then take the metal screen from a real cars air cleaner for the fencing. Some fine wire run through the holes and twisted is a very prototypical way of fastening the fence to the posts and you're there.