|
Well, I found a stamping on the trans that I was able to decode to reveal that the new trans was originally installed in a '94 chevy. I learned from the torque converter tag that it was either used with a 3.1 or 3.4 engine. The pontiac factory service manual shows different internal electronic connections and mechanical parts for the 4T60E depending on whether it is built for 3.8 or the 3.4.
If the trans would work at all (which is doubtful owing to the mismatched electrical connections), it would not work properly because it was built to be used with a 3.8.
All 4T60E transmissions (even with the same gear ratios) are not the same.
This trans will be going back to the seller.
__________________
Bill Buttermore
Ames, Iowa
|