Quote:
|
Originally Posted by sanpedrodave
disregard inlet tube stuff ...wrong post..... your cutting in and out could be the ecm failing....when it goes it will be for good until you replace it. remove the wires from the ecm on the back and re connect to take care of oxidation prob......then pop your dist. cap and rotor and disconnect and reattach the leads to the hall switch on the dist. that ecm costs 39 bucks at auto store or free at pick your part junk yard if you want to trouble shoot. sounds like you got electronic or loose wire problem. good luck
|
Everything you say is true except it is not the ECM. The ECM is the computor in a '93, You are talking about the ignition module.