|
I have had the exact simlilar problems with my 95. I would bang on the dash baord to turn the dash light a tail lights. After while this actions did not work.
The problem is that your wire harness conenctors that plugs into the switch get loose. What I did was take the 2 colored shimes that are on each side of the connector, and wrap one revolution of electrical tape aound the base of the shim. The re-install the shims. This should fit a lot tighter and not hold the delphia pin connectors firmly angains the copper pin on the switch. This seems t obe working for me in the cold and warmer weather.
Hope this is helpfull.
|