Quote:
|
Originally Posted by CD Smalley
You have a sticking caliper.
My guess is when you replaced the calipers you did not grease the caliper bolts. The calipers actually slide back and forth on these bolts and it's very important that they have the proper type of high temp grease on them. If they are corroded and rough I'd replace them as well.
|
Thanks for the tip! The bolts were prety rough so I replaced them.The top one on the right side had a "groove" worn in it that looked bad enough that it might cause the caliper to stick.- But what I found by accident was the mechanic that put the brake lines on had the left and right hoses reversed, i never would have thought there was a difference but, i had him switch them and wala! - no more pull to the right! The hoses look identicle from the outside to me, but they must be different on the inside!