|
Our 97s have a gasket and no O-ring.Once you remove the T-stat housing you will see the paper gasket either attached on the manifold or the T-stat housing or on both.To remove the gasket get a good putty knife and place a paper towel inside the location of the manifold so not to get debris into it,scrap both the housing and manifold untill all paper is removed and clean and no gasket left on either surface or you will not get a good seal and it will leak.The T-stat you ordered from PFYC wount come with a gasket,so your best bet is to go by NAPA/dealer and pick one up.
~Larry~
__________________
ClubGP Member 6530
Since 2001
|