|
I couldn't find the removal procedure for the 2 door 95. Closest I could find was for the 2000 2door. GM's descriptions are a little lame though.
Trim Panel Replacement - Body Side 2-Door Utility
Removal Procedure
Remove the upper and lower front seat anchor bolts.
Remove the rear seat belt lower anchor nut.
Remove the assist handle.
Remove the coat hook.
Remove the endgate or the liftgate opening door sill trim plate.
Fold the rear seats down.
Remove the jack storage cover (left side only).
Remove the screw that retains the upper body side trim body side trim panel to the vehicle (left side only).
Remove the upper body side trim panel from the vehicle.
Feed the seat belt through the trim panel.
Remove the body side front lower trim panel from the vehicle
|