[bied10]

PROBLEM SOLVED! I dropped the tank (3rd time) and hooked the wires back up to see if it would pump. The pump ran, no fuel... I took the sending unit out and looked at the wiring harness compared to the old. Every thing was backwards. I tore the harness apart (this took as long as dropping the whole tank) and put the wires where they should go and like magic, fuel was flowing like wine. 10 minutes of reinstalling the tank later, it runs great. I don't think my sending unit is working anymore, but I'm not going to attempt that untill it is a little warmer....

Just a note: the wiring harness was a simple unplug the old and plug in the new. I think NAPA should give me a free vacation or something for my trouble.