[superbluecivicsi]

First off is concerning the oil level. if your oil light comes on, you need to check it imeadiately. I cant stress how important it is to keep your oil level up with boost. If you want your motor to suvive the extra wear and tear, use fully synthetic motor oil and keep the oil level up to the full mark on the dipstick. simple as that. i change mine every 3500 miles with mobil 1 fully synthetic. you will start to notice how quickly your motor oil goes bad with boost. if your oil light is already on, and you are still driving it, you are already causing some damage to your internals.

2nd off, you dont have any problems with A/F mixtures. you will know when you do, because other codes will accompany it. you dont need a stupid vtec light. if you want it, make sure the lines do not have breaks in em. it will throw the code. also, you may have accidently knocked over lines, give them a check. i personally dont believe in sound as a diagnoses for vtec to be working. if all else fails check the vtec seloniod itself, heres the how to procedure for it http://www.automotiveforums.com/vbul...d.php?t=324804

Also did you do the install yourself? if you spent $3500 on this, you need to be more aware of what is going on with your setup. thats alot of money to be throwing away from not checking why your oil pressure light is going off. also if the change in oil pressure since the last time you checked it is dramatic, check for leaks and check to see if you did the oil drain tube correctly.

PS, the main gauges you will need is a boost/vac gauge and egt. get a good engine management system and you will be fine.