Quote:
|
Originally Posted by tom3
Only thing to do different is to open the bleeder screws when you push the piston back in the caliper, let the fluid squirt out. Don't want to push the brake fluid back through the ABS spools, the brake fluid can have some dirt/moisture/clots in it from sitting in the lines for so long. I always pull all the fluid out of the master cylinder reservoir and wipe it out, put in new clean fluid too.
|
Wrong.
Never touch the bleeding screws or you are looking for problems.
All that needs to be done is take the lid off of the master cylinder resevoir, suck out a bit of fluid to compensate for the fluid you will be pushing back them and simpley use a c-clamp to compress the caliper cylinders. When you push the cylinders back the fluid will go back into the resevoir and no air will be introduced into the system.
Again, don't touch the bleeders. You don't have to.