yeah dude.....after you remove the screw..it SHOULD slide out..but in addition to the screw the light assembly itself slides onto metal sliders, etcetc on the car so sometimes you have to tug it a little..and make sure when you re-install the light you line them back up correctly..there is one large slider behind the clear portion of the corner light (directly adjacent to the headlight), and two smaller ones (these are the ones most often mis-aligned during re-assembly) behind the aft/yellow portion of your corner light. I can't stand peeps that are too lazy to re-install the lights correctly. Take 30 seconds a make sure it is right. Good Luck!
