Quote:
|
Originally Posted by Jeremy-WI
On a vehicle updated with the new actuator, check the TCASE and 4x4 fuses to make sure they are good. With the ignition on and a 4 wheel drive mode selected, at the front actuator harness you should have 12v at the brown and light blue wire. With igntion on and 2WD selected you should have power only at the brown wire
|
I presume the 3rd wire (i dont know the color) is ground all the time?? I will check it asap and let you know. I know currently there is no power at the connector at all in 2wd that is why the actuator wont run back in. Thanks again!!!