[pntcbonnesse]

For the 1995 Bonneville SSE and possibly SE on your OBD I ground pin 4 with pin 8... hold it there... when doors lock and unlock dont be afraid it is to let you know that the car is ready to program. While the Pins are connected to each other press one button on the key fob... if you hear whichever button you press engage, then the fob is programed, if you have another (up to four) press a button on that one and when that engages that fob is also programed. Now disconnect the connection between pin 4 and pin 8. Your fob(s) are ready to use. If at any time pin 4 and pin 8 are connected again then the fobs will not work and you will have to reprogam them

sorry it took me so long to get back to you my laptop burned out. I hope this helps and let me know when it works. Thanks for waiting!